Susceptibility of Zirconium Alloys to Delayed Hydrogen Cracking

Résumé du livre

Smooth and notched cantilever beams and round-notched bars were machined from pressure tubes of cold-worked Zr-2.5Nb and Zircaloy-2. They were loaded in the temperature range 290 to 520 K. After two thermal cycles and at high stress, cracks were initiated in smooth beams of cold-worked Zr-2.5Nb. Under the same test conditions, cold-worked Zircaloy-2 plastically deformed with no cracking. When notches were present, cracks propagated at the same rate in both materials by delayed hydrogen cracking. In cold-worked Zr-2.5Nb, the crack velocity followed an Arrhenius plot with an apparent activation energy of 42 kJ/mol. Below 420 K, the threshold stress intensity factor for delayed hydrogen cracking was about 5 MPa m. Therefore, cracking can be prevented by keeping tensile stresses very low.