Calibration of Two Quality Measuring Bends of 3 with a Water Vapour Mixture in the Reference Conditions of the CIRENE Prototype
Preliminary experiment on the emptying of the heated channel, following a partial failure of the cylindrical body
An Investigation on the Blowdown of a Tank Filled with Saturated Steam-water
Density Measurements in and Heated Channels at High Pressure by Means of a Quick-closing Valve Method
Density Measurements of Steam-water Mixtures Flowing in a Tubular Channel Under Adiabatic and Heated Conditions
Determination of the hydrodynamic thrust exerted by a two-phase current on a bundle of elements used in the power channel of the CIRENE reactor
Study on incidents in emptying heated channels, in the presence of a pressurized emergency tank
Measurement of the volumetric fraction of vapour in a boiling channel with the resistive impedance method : measurement principle and design criteria
The Measurement of Fractional Steam Voidage in a Boiling Channel with the Impedance Method
Preliminary tests on the use of a pressurized tank as an emergency capacity upholder in the power channels of the CIRENE prototype reactor
Effect of bundle orientation on charge loss in prototype channel
Experimental measurements and calculus criteria for the pressure drop in the outlet end-fitting of the prototype channel
Stationary crisis tests in support of the analysis with the RATT code of the reverse blowdown tests
Density Measurements of Steam-water Mixtures Flowing in Adiabatic and Heated Annular Channels
Density Measurements of Steam-water Mixtures Flewing in a Tubular Channel Under Adiabatic and Heated Conditions...
Density of Steam-water Mixtures Flowing in Annular Conduit Under Adiabatic and Heated Conditions
Literature Analysis on Fluid Diodes
Preliminary experiments with the CIRCE installation on the control and stability of the emergency saturated tank
Report on the theoretical and experimental work for studying the discharge of power channels following plant incident
Bottom Flooding Experiments with Simple Geometries Under Different E.C.C. Conditions